Selected:

Essex Designed AP Racing Competition Brake Kit (Front CP8350/325) | Part #: 13.01.10002

KD 1,030.000

Out of stock

Essex Designed AP Racing Competition Brake Kit (Front CP8350/325) | Part #: 13.01.10002

KD 1,030.000

Big Brake Kit/Track (FR)

Out of stock

Notify me when its back in stock

Share this product

Description

Essex Designed AP Racing Competition Brake Kit (Front CP8350/325)- E46 M3

Part #: 13.01.10002

Complete front Essex Designed AP Racing Competition Brake Kit for E46 M3

  • Features AP Racing CP8350 four piston calipers
  • 325x32mm, 70 vane AP Racing disc
  • Saves 14 unsprung lbs. from nose of e46 M3 vs. OEM brakes
  • Every component designed to resist the heat of extended track sessions
  • Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
  • Designed to work with OEM brakes or our rear e46 M3 caliper upgrade kit

Application: Track

WHAT’S IN THE BOX?

  • One pair AP Racing CP8350 racing calipers
  • One pair 325x32mm AP Racing CP3908, 70 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
  • One pair caliper mounting brackets and hardware
  • One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
  • Detailed installation instructions
  • Including brake pads Ferodo DS3.12

Advantages Over OEM Brake System

Our CP8350 Competition Brake Kit offers our customers the following advantages over the E46 M3 OEM brake system:

  • Approximately 14 lbs. of unsprung weight reduction from the nose of the car
  • AP Racing calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
  • CP8350 calipers use a 20mm thick, commonly available brake pad shape
  • Stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
  • Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
  • Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
  • Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
  • High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
  • No dust boots to burn up
  • Simple pad change with one bolt, no caliper removal required
  • Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
  • Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
  • Championship winning, 70 vane, fully floating, AP Racing J Hook racing discs with 10 attachment points to hat
  • Anti-knockback/anti-rattle disc attachment hardware
  • Replacement iron disc rings available at an extremely competitive replacement price
  • Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
  • Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design
Model Year
Essex/AP BBK 2001-07 E46 M3
Caliper CP8350-2S4L/3S4L
Weight no Pads 4.8lbs. 8 lbs.
27.0mm x 2
Piston Sizes 38.1mm x 2
41.3mm x 2
Piston Area 49.56cm^2
Inlet Thread M10x1.0
Mounting Type Radial
Mtg. Centers 152mm
Mtg. Offset 44mm
Pad thickness 20mm
Disc CP3908-102/103GA
Type 2-piece floating
Weight 15.93 lbs. 19 lbs.
Diameter 325mm 325mm
Thickness 32mm 28mm
Radial Depth 54mm
No. of Vanes 70
×
×

Cart