Selected:

Essex Designed AP Racing Radi-CAL Competition Brake Kit (Front 9660/372mm) Part #: 13.01.10045

KD 1,805.000

Out of stock

Essex Designed AP Racing Radi-CAL Competition Brake Kit (Front 9660/372mm) Part #: 13.01.10045

KD 1,805.000

Big Brake Kit/Track (FR)

Out of stock

Notify me when its back in stock

Share this product

Description

Complete front Essex Designed AP Racing Radi-CAL Competition Brake Kit for the F87 M2 and M2 Competition, F80 M3, F82 M4:

Application: Track

WHAT’S IN THE BOX?

  • One pair AP Racing CP9660 Radi-CAL Pro5000R six piston calipers
  • One pair 372x34mm AP Racing CP6084, 84 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
  • One pair caliper mounting brackets and hardware
  • One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
  • Detailed installation instructions
  • Including brake pads Ferodo DS3.12 and Pad tension kit

Advantages Over OEM Brake System

Our CP9660/372mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:

  • Saves 26 lbs. of unsprung weight vs. the OEM M2 Competition front brake package!
  • Approximately 10 lbs. of unsprung weight reduction vs. the OEM standard front iron brake package
  • AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
  • CP9660 calipers use a 18mm thick, commonly available brake pad shape
  • Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
  • Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
  • Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
  • Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
  • High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
  • No dust boots to burn up
  • Simple pad change with two bolts or quick-change spring clip, no caliper removal required
  • Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
  • Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
  • Championship winning, 84 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
  • Anti-knockback/anti-rattle disc attachment hardware
  • Replacement iron disc rings available at an extremely competitive replacement price
  • Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
  • Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design
Model Year 2019+ 2015+
Essex/AP BBK OEM M2 Competition OEM F87/F80/F82 M2/M3/M4 Standard Iron Brakes
Caliper CP9660-2S4L/3S4L Six piston fixed bridge Factory Four Piston Road Caliper
Weight no Pads 6.2 lbs. 10.7 lbs. 8 lbs.
27.0mm x 2 30mm x 2
Piston Sizes 31.8mm x 2 34mm x 2 4x40mm
38.1mm x 2 36mm x 2
Piston Area 50.1cm^2
Inlet Thread M10x1.0
Mounting Type Radial
Mtg. Centers 180mm
Mtg. Offset 42mm
Pad thickness 25mm 18mm
Disc CP6084-102/103GA
Type 2-piece floating Dual-cast
Weight 21.4 lbs. 30.4 lbs. 24.2 lbs.
Diameter 372mm 400mm 380mm
Thickness 34mm 36mm 30mm
Radial Depth 54mm 76mm 70mm
No. of Vanes 84 32 30
×
×

Cart