Essex Designed AP Racing Radi-CAL Competition Brake Kit (Front 9660/372mm) Part #: 13.01.10045
KD 1,805.000
Big Brake Kit/Track (FR)
Out of stock
Notify me when its back in stock
Description
Complete front Essex Designed AP Racing Radi-CAL Competition Brake Kit for the F87 M2 and M2 Competition, F80 M3, F82 M4:
Application: Track
WHAT’S IN THE BOX?
- One pair AP Racing CP9660 Radi-CAL Pro5000R six piston calipers
- One pair 372x34mm AP Racing CP6084, 84 vane, J Hook racing discs, with fully floating 6061 hard anodized aluminum hats, and attachment hardware
- One pair caliper mounting brackets and hardware
- One pair Spiegler Stainless Steel Brake Lines with abrasion resistant coating
- Detailed installation instructions
- Including brake pads Ferodo DS3.12 and Pad tension kit
Advantages Over OEM Brake System
Our CP9660/372mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:
- Saves 26 lbs. of unsprung weight vs. the OEM M2 Competition front brake package!
- Approximately 10 lbs. of unsprung weight reduction vs. the OEM standard front iron brake package
- AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
- CP9660 calipers use a 18mm thick, commonly available brake pad shape
- Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
- Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
- Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
- Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
- High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
- No dust boots to burn up
- Simple pad change with two bolts or quick-change spring clip, no caliper removal required
- Lifetime professional caliper rebuilding support by Essex (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
- Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
- Championship winning, 84 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
- Anti-knockback/anti-rattle disc attachment hardware
- Replacement iron disc rings available at an extremely competitive replacement price
- Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
- Highest quality, Spiegler stainless steel brake line with clear sheath that reduces compliance over OEM rubber design
Model Year | 2019+ | 2015+ | |
Essex/AP BBK | OEM M2 Competition | OEM F87/F80/F82 M2/M3/M4 Standard Iron Brakes | |
Caliper | CP9660-2S4L/3S4L | Six piston fixed bridge | Factory Four Piston Road Caliper |
Weight no Pads | 6.2 lbs. | 10.7 lbs. | 8 lbs. |
27.0mm x 2 | 30mm x 2 | ||
Piston Sizes | 31.8mm x 2 | 34mm x 2 | 4x40mm |
38.1mm x 2 | 36mm x 2 | ||
Piston Area | 50.1cm^2 | ||
Inlet Thread | M10x1.0 | ||
Mounting Type | Radial | ||
Mtg. Centers | 180mm | ||
Mtg. Offset | 42mm | ||
Pad thickness | 25mm | 18mm | |
Disc | CP6084-102/103GA | ||
Type | 2-piece floating | Dual-cast | |
Weight | 21.4 lbs. | 30.4 lbs. | 24.2 lbs. |
Diameter | 372mm | 400mm | 380mm |
Thickness | 34mm | 36mm | 30mm |
Radial Depth | 54mm | 76mm | 70mm |
No. of Vanes | 84 | 32 | 30 |